I cannot get it to work, but perhaps I’m missing something. Say I want to trigger Scene 1 at full intensity, what do I have to set the channel levels to? Channel 1 at 5% and channel 2 at 100% (assuming a start address of 1)? I’ve configured...
casDMX is not controlling fixture I have a RGBW DMX fixture that works with any DMX source except the casDMX module. It does not track any channel and flickers randomly. Is there something I am missing? We assume that you added the casDMX to your Casambi network and...
I would like to ask you some questions about casDMX “copy slot” parameter. I know that “copy slot” parameter allows retransmitting the information contained in a block of X addresses, starting with the “DMX start address”: (See attached image) Anyway, I don’t see the...
Q: I have 16 Casambi controlled lights in an install, Can I use just the one DMXcas to control them? A: If you are making one control zone of up to 4 Casambi channels, yes. You only get 4 channels of control per DMXcas. Q: So, I could have the 12 lights split into 4...
After a few driver code charges they hit all the fittings working color charge using casDMX to reach the DMX control box. What’s happening now is that when the power is applied they have full color control, but when off is selected from the Casambi app, they...
Recent Comments